Shelly Wi-Fi Wi-Fi Dimmer 2 LED, Alexa and Google Home compatible

Artikelnummer: 4467

22,96

Enthält 19% MwSt. DE
zzgl. Versand
Lieferzeit: nicht angegeben
Nicht vorrätig

Lieferzeit: Sofort versandfertig, Lieferfrist 1-3 Tage

Shelly Wi-Fi Wi-Fi Dimmer 2 LED, Alexa and Google Home compatible

This Shelly Dimmer 2 is Wi-Fi controlled. The Shelly Dimmer 2 has a measurement function and is also suitable for LED, Alexa and Google Home. Control your dimmable LEDs with the Shelly Dimmer 2.

Here are the technical features:

  • integrated web server
  • has been designed for installation in limited spaces, such as flush-mounted boxes, etc.
  • integrated overload and temperature protection
  • can be used as a stand-alone device, as an accessory for a home automation controller, or as a component of another automation system.
  • Operation possible without neutral conductor

The Shelly devices can be operated with the free Shelly Cloud – One app or also with Google Home and Amazon Echo.

  • Power supply: 110 – 230 V ± 10%, 50 / 60 Hz AC.
  • Compatible with all major international voltage standards.
  • Operation possible without neutral conductor ( min. 10 W )
  • Controllable via existing switch and app
  • Voice control with Google Home and Amazon Echo
  • Autom. on / off sunrise / sunset
  • Weekly time schedule
  • Power measurement (with neutral conductor connected)
  • Dimming function
  • on / off function
  • Unit power consumption: < 1 W
  • Phase control
  • Channels: 1 channel
  • Operating temperature: 0 to + 35 ° C
  • Overload and temperature protection: 105
  • Intelligent on / off
  • Dimmable LED: 50 – 200 VA / 10 W – 200 W
  • Incandescent lamps and halogen lamps: 10 – 220 W
  • Resistive inductive loads ferromagnetic transformers: 50 – 150 VA
  • Colour change: No (use the Shelly RGBW 2 here, it works with 12 – 24 V DC )
  • Wireless / WiFi protocol: 802.11 b / g / n
  • Radio signal power: 1mW
  • Radio frequency: 2400 – 2500 MHz
  • Range: up to 50 m outdoors and up to 30 m indoors (depending on building material)
  • Dimensions: 42 mm x 36 mm x 14 mm
  • Can connect to any Wi-Fi network or act as an access point
  • Controlled via WLAN with e.g. a mobile phone or tablet, a computer, an automation system or any other device that supports the HTTP and / or UDP protocol

The Shelly Dimmer 2 always requires a minimum load of 10 watts. In installations with loads below 10 watts, which are particularly common with LED luminaires, a Shelly bypass is required to ensure the dimmer functions properly.

Connection of the Shelly 2

No neutral conductor; without minimum load requirement

Standard wiring with neutral conductor and SW connected to neutral conductor