Red LED strip 5 metre roll 12 Volt IP20 7.2 Watt

Artikelnummer: 1605

20,95

Enthält 19% MwSt. DE
zzgl. Versand
Lieferzeit: nicht angegeben
Nicht vorrätig

Lieferzeit: Sofort versandfertig, Lieferfrist 1-3 Tage

Red LED strip roll 12 Volt IP20 7.2 Watt for dry rooms | Length 5 metres | Width 10 mm | 30 LED/m SMD5050

This single-colour red LED strip is suitable for indoor applications, for dry rooms only. The power of the LED strip is 7.2 watts per metre. You can trim this red LED strip every 10 cm, simply find the marked cut mark and trim it to the desired length with scissors. When gluing, make sure that the surface is smooth, dry and free of grease. DMX control with decoder possible.

Here are the most important features of this red 12 volt LED strip:

  • Protection class: IP20 for indoor applications
  • Length: 5 metres
  • Width: 10 mm
  • Voltage: 12 Volt
  • 7,2 Watt per meter
  • Light colour red
  • 30 LED chips per metre
  • Chip type: SMD 5050
  • Can be shortened every 10 cm

Single-colour red LED strips 12 Volt or 24 Volt ?

It depends on the application, where and for what do you want to use the LED strip? Do you only need the LED strip for decorative purposes? Then it hardly makes a difference whether you install a 12 volt LED strip or a 24 volt LED strip. But if you want to install a few metres more, the situation is different.

Indirect red lighting in the room

If you want to install a strip over a longer distance, such as indirect lighting in the living room that goes completely around all the walls, the situation is different. In this case, I always recommend the 24 Volt LED strips. The advantage of the 24 volt version is that you have much less line loss and you need fewer connection points. It is important to us that you are satisfied, we have both versions in stock in a large selection. We also have the appropriate transformers, whether 12 volts or 24 volts, in all common sizes and power classes.

Information on the wattage of LED strips

The information in Watt only gives information about how much energy this LED strip needs, but it has nothing to do with the brightness. The luminosity or brightness is measured in lumens, not in watts. To determine the exact lumen values for your LED strip, you need a lumen meter.

IP20 protection class for indoor use

These LED strips have an IP20 protection rating. This protection class means that these LED strips are not specifically protected against water. However, there is a so-called touch protection with the IP20 protection class, which applies to solid foreign bodies that are larger than 12.5 mm in diameter. What does this mean? You cannot touch any components that are supplied with voltage.

To put this red 12 volt LED strip into operation, you need the following accessories:

  1. Suitable switching power supply
  2. If you want to dim the light you need an LED controller / dimmer
  3. Radio remote control or wall switch

Bewertungen

Es gibt noch keine Bewertungen.

Schreibe die erste Bewertung für „Red LED strip 5 metre roll 12 Volt IP20 7.2 Watt“

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert