LED Panel 30 × 150 cm neutral white 230 Volt silver

LED Panel 30 × 150 cm neutral white 230 Volt silver

This LED panel 30×150 cm neutral white 230 Volt 4000 Kelvin is suitable for rooms that need to be bright and well illuminated. You will not create a cosy ambience with this lamp. This LED illuminant has been designed to illuminate e.g. working areas brightly and neutrally. You can use this LED panel in the size 30×150 cm, for example, in a practice or in waiting areas and corridors. If you want to use the light source in the private sphere, I think it is suitable as ceiling lighting in the kitchen or utility room. The light aperture emits the light at an angle of 120 degrees and the lamp has a service life of approx. 35000 hours (rated service life) with approx. 100000 switching cycles. The housing of this LED panel is made of aluminium and the LED light panel is made of special plastic. The complete light panel is only 11 mm high.

Mounting the LED panel on the wall or ceiling

Depending on how and where you want to mount the panel, we have different solutions for you. Do you want to mount the LED lamp on a ceiling but cannot saw an opening? Then I recommend using an LED mounting frame. The mounting frame is only 5 cm high and is simply attached to the ceiling or wall with dowels and screws. The LED panel mounting frame consists of 4 aluminium profiles and is simply screwed together or, in the case of the pro version, simply plugged together. First screw or plug together only 3 parts of the mounting frame and then slide the LED panel including the LED power supply unit into it. Then attach the 4 aluminium profile and everything is ready. It looks neat and tidy and you can’t see anything. Another advantage is that you can simply pull out the LED panel again and replace it in case of repair. The housing frame of the LED panel is silver, the mounting frames are available in silver and white. The mounting frame in silver has the article number 2159.

Integrating the LED panel into the ceiling

If you have the possibility to saw an opening in the ceiling, you can also use our LED panel installation frame. With this variant, the panel is almost flush with the ceiling. The panel is simply placed in the mounting frame beforehand and then immediately pressed into the opening complete with mounting frame, where it is then held to the ceiling by the attached retaining clips.

Cable system for suspending the LED panel

With our cable system, you can also suspend the panel from the ceiling. Simply shorten the cable system as you like. The panel has eyelets on the back and the hooks supplied with the cable system can be used to connect the panel to the cable system. If you are interested in the LED wire system, click on the following link: LED cable system complete set

Here are the most important details in a nutshell:

• Light colour in cold white 4000 Kelvin
• Beam angle 120 degrees
• Power supply included
• Housing frame in silver
• Housing height only 11 mm
• dimmable only with accessories
• Manufacturer’s warranty 3 years
• Light output 4400 lm
• Epistar SMD2835 LED chips

The standard version of this LED panel 30×150 cm is not dimmable. In our assortment you will find a selection of suitable dimmable transformers (Dali/Push or 1-10V) and dimmer sets for the LED panel, so you will be able to dim this light source. The standard driver of the LED panel (art. no. 2481) is not dimmable.