LED house number a

Artikelnummer: 4010

24,95

Enthält 19% MwSt. DE
zzgl. Versand
Lieferzeit: nicht angegeben
Nicht vorrätig

Lieferzeit: Sofort versandfertig, Lieferfrist 1-3 Tage

LED house number a | three white tones adjustable | protection class IP65

Now new: Modern LED house number with individual light setting options and two mounting types. Good visibility in the dark.

Note: For the start-up of the LED house numbers you need a power supply unit/multiple plugs/switches, which have to be ordered separately.

EITHER take the 12V plug-in power supply unit (art. no. 4256) with light colour switch and multiple plug. Up to 4 LED house numbers can be connected, e.g. 347a.
OR you order a base plate (art. no. 4181 – 4184 & 4191 – 4194), which includes power supply, multiple plug and switch. There are base plates for one to four-digit LED house numbers.

The LED house number “a” has a height of 15 cm and is supplied with a 50 cm long connection cable. Font is Arial Bold.

For easy and direct mounting on a house wall, the following accessories are included in the delivery:

  • Mounting template with adhesive strip
  • Spacer
  • Wing nut
  • Threaded rod

The matching power supply unit with switch must be ordered separately.

The 50 cm long connection cable is connected to the 4-way distributor of the power supply unit to make it waterproof (protection class IP65).

The super feature: The LED house number “a” can shine in three shades of white: Warm white (2700K), neutral white (4000K) and cool white (6500K). The colour temperature of the LED house number light is set via a switch. After switching on, the last light colour setting is always used (memory function).

Another plus point: the outdoor house number can be dimmed via the switch.

The modern LED house number a was manufactured by means of injection moulding. A circuit board with LEDs is permanently installed in the LED house number light. The illuminated house number convinces with low power consumption and a long service life.
Further mounting options

The illuminated 3D house numbers can also be mounted on a house wall using a base plate (to be ordered separately). Cables, 4-way plug, transformer and switch disappear invisibly behind this base plate. Please note that the width of the base plate depends on the number of LED house numbers (one/two/three digits, etc.).