LED aluminium joint profile anodised 16 x 15mm opal 200cm

Artikelnummer: 4297


Enthält 19% MwSt. DE
zzgl. Versand
Lieferzeit: nicht angegeben
Nicht vorrätig

LED aluminium joint profile anodised 16 x 15mm opal 200cm

You can work this aluminium joint profile into a joint. When selecting the appropriate LED strip, please ensure that the LED strip width of 8 mm is not exceeded with this profile. The LED strip is glued into the profile, the LED strips have an adhesive tape on the back. Make sure that the LED aluminium joint profile is clean, dry and free of grease.

Included in delivery

  • LED joint profile anodised 16 x 15 mm (length: 200 cm)
  • Four retaining clips for attachment
  • Two end caps for a clean finish of the profile

There are aluminium profiles that can be embedded in joints and are therefore also called joint aluminium profiles.

An LED strip is glued into the joint profiles and emits light through the opal cover. The emerging light appears like a line of light, i.e. individual points of light are not or barely visible. Due to this line effect, the joint profile is often used to mark transitions, e.g. window frames and walls. Joint profiles can also be integrated into wall or ceiling panelling and thus contribute to the basic lighting of a room. This lighting effect is an eye-catcher for guests and visitors. Offices are given a modern touch and the lighting conditions are improved in a discreet way. Or perhaps you would like to set off a partial area from the rest with light lines? By recessing the aluminium profiles, little or no space is usually lost. The joint profiles are therefore also interesting for installation in wardrobes, kitchen cabinets or shelves.

Everything is further enhanced by the correctly selected LED strip. There are single-colour and multi-colour LED strips. If only the white light colour is important, we recommend CCT LED strips that shine with warm white, neutral white or cool white LED light. For coloured light, RGB CCT LED strips are a great solution.